This is a BRAND NEW front 14 tooth sprocket by Vito's Performance fits: 1987-2006 Yamaha Banshee 350 1988-2004 Warrior 350 2004-2013 Raptor 350

This is a BRAND NEW front 15 tooth sprocket by Vito's Performance fits: 1987-2006 Yamaha Banshee 350 1988-2004 Warrior 350 2004-2013 Raptor 350

This is a BRAND NEW front 16 tooth sprocket by Vito's Performance fits: 1987-2006 Yamaha Banshee 350 1988-2004 Warrior 350 2004-2013 Raptor 350

This is a BRAND NEW front 13 tooth sprocket by Vito's Performance fits: 1987-2006 Yamaha Banshee 350 1988-2004 Warrior 350 2004-2013 Raptor 350

This is a brand new Yamaha Raptor 660 or 700 thumb throttle lever assembly by VITOS PERFORMANCE Ready to install on any year Raptor 660 or 700 2001-2017, and it will also fit a Raptor 350, 250, 125, Wolverine, Big Bear, Breeze, or Kodiak etc Replaces OEM Yamaha part # 4KB-26250-00-00 and 4KB-26

This is a BRAND NEW front 12 tooth sprocket by Vito's Performance fits: 1987-2006 Yamaha Banshee 350 1988-2004 Warrior 350 2004-2013 Raptor 350

This is a BRAND NEW front 17 tooth sprocket by Vito's Performance fits: 1987-2006 Yamaha Banshee 350 1988-2004 Warrior 350 2004-2013 Raptor 350

This is a BRAND NEW front 18 tooth sprocket by Vito's Performance fits: 1987-2006 Yamaha Banshee 350 1988-2004 Warrior 350 2004-2013 Raptor 350

This is a BRAND NEW front 19 tooth sprocket by Vito's Performance fits: 1987-2006 Yamaha Banshee 350 1988-2004 Warrior 350 2004-2013 Raptor 350

This is a BRAND NEW Yamaha Warrior / Raptor 350 front sprocket guard / guide support This a a genuine OEM factory Yamaha parts This will fit any year 1987-2006 Warrior 350: 1987-2004 Raptor 350: 2004-2013 Ready to install! In stock, ready to ship

This is a brand new Yamaha Raptor 660 or 700 thumb throttle lever assembly by VITOS PERFORMANCE Ready to install on any year Raptor 660 or 700 2001-2017, and it will also fit a Raptor 350, 250, 125, Wolverine, Big Bear, Breeze, or Kodiak etc Replaces OEM Yamaha part # 4KB-26250-00-00 and 4KB-26250-

This is a PAIR of rear chain tension adjusters for any year Yamaha sport quad Brand new from VITO'S PERFORMANCE OEM quality, fit, and finish, at a fraction of the price This includes 2 units, one for the left, and one for the right You get 2 units, exactly as shown in the photos Fits: Yamaha ...

This is a BRAND NEW rear 36 tooth sprocket from Vito's Performance Replace OEM Yamaha part #5TG-25438-10-00 fits: 2004 Yamaha Raptor 350 (YFM350R) 2004 Yamaha YFZ450 2005 Yamaha Raptor 350 (YFM350R) 2005 Yamaha YFZ450 2006 Yamaha Raptor 350 (YFM350R) 2006 Yamaha Raptor 700 (YFM700R) 2006 Yamaha YFZ

This is a BRAND NEW Vito's Performance swingarm bearing carrier for a 2004-2013 Yamaha Raptor 350. These are over $195 new from Yamaha! FREE SHIPPING, Brand New Upgraded over stock, includes ZERK grease fitting, so keep everything fresh; OEM ones do not have this option! Replaces OEM Yamaha part

This is a BRAND NEW Yamaha Banshee steering stem bushing by Vito's Performance Will also fits YFZ450, Warrior, Raptor 700, Blaster, Wolverine, Kodiak, etc Replaces Yamaha OEM part # 1UY-23812-00-00 and 93112-31011-00 ...

This is a brand new Carburetor side cover plate with screws and o-rings. This is the cover on the side of the carburetor also fits: 2001 - 2005 Raptor 660 2002 - 2008 Grizzly 660 2008 - current Raptor 250 2004 - current Raptor 350 2011 - current Raptor 125 Replaces these OEM Yamaha part numbers: 4W

This is a BRAND NEW Vito's Performance swingarm bearing carrier spacer tube for a 2004-2013 Yamaha Raptor 350 (spacer tube only) FREE SHIPPING, Brand New Replaces OEM Yamaha part #: 5YT-25317-00-00

This is a BRAND NEW front brake lever from Vito's Performance will fit MANY different models Including: Yamaha Banshee 1987-2006 Yamaha Blaster 1988-2006 Yamaha Warrior - 1987-2004 Yamaha Raptor 350 - 2004 - current Yamaha Raptor 660 2001 - 2005 Yamaha Raptor 700 2006 - current Wolverine, Big Bear

This is a BRAND NEW front clutch lever from Vito's Performance will fit MANY different models Including: Yamaha Banshee 1987-2006 Yamaha Blaster 1988-2006 Yamaha Warrior - 1987-2004 Yamaha Raptor 350 - 2004 - current Yamaha Raptor 660 2001 - 2005 Yamaha Raptor 700 2006 - current Wolverine, Big Bear

This is a BRAND NEW Vito's Performance swingarm bearing carrier for a 2004-2013 Yamaha Raptor 350 (housing only) FREE SHIPPING, Brand New Upgraded over stock, includes ZERK grease fitting, so keep everything fresh; OEM ones do not have this option! Replaces OEM Yamaha part #: 5YT-25311-00-00

This is a BRAND NEW Vito's Performance swingarm bearing carrier bearings and seals for a 2004-2013 Yamaha Raptor 350 FREE SHIPPING, Brand New Replaces OEM Yamaha part # 93306-00710-00 and 93106-46001-00

This is a NEW factory OEM Yamaha air filter cage + foam seal Will fit: Yamaha Warrior 350 1987-2004 Yamaha Raptor 350 2004-2007, 2009,2011 Yamaha Wolverine 1995-2005 Yamaha Grizzly 600 1998-2001 Yamaha Grizzly 660 2002-2008 This part fits these bikes: YAMAHA GRIZZLY 600 4X4 Year: 1998 Part: GUIDE

This is a pair of NEW OEM factory Banshee front spindles. This is for both sides, left and right This is where the front hubs slide onto. You get the left and the right side. They came from an a-arm Banshee (1991-2006), but these will fit any year Banshee. The brake calipers from the J-arm ...

This is a BRAND NEW Vito's Performance thumb throttle cable Will work on ANY year Yamaha Raptor 350 YFM350R This is for the THUMB throttle setup, and will NOT work for the TWIST setup.

This is a set of 2 front spindle nuts + washers for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the front hub onto the steering spindle OEM quality, fit, size, and finish, at a fraction of the dealer price Fits: Yamaha Banshee 350cc 1

This is a NEW complete Yamaha Banshee 350 or Raptor 660 fuel petcock for the gas tank. This is made by VITO'S PERFORMANCE and has DUAL OUTPUTS This is a HIGH FLOW item - flows MUCH MUCH faster than the stock petcock A MUST HAVE for aftermarket carbs, especially if you are running methanol / alcohol

This is a BRAND NEW Yamaha Banshee upper + lower a-arm bushing replacement kit from Vito's Performance Includes 12 a-arm bushings This kit will replace all bushings in all 4 a-arms Includes enough to do FOUR (4) a-arms - both LEFT and RIGHT, upper and lower: 12 x Bushings Fits: 1987-2006 Banshee ...

This is a set of sixteen (16) YAMAHA Banshee hub lugnuts + washers These are the nuts that hold the front and rear rims to the hubs They will fit any Yamaha sports quad 1987-2019, including Banshee, Raptor 700 660 350 250, Warrior, Blaster, YFZ450, etc This part fits these bikes: YAMAHA BA

This is a NEW Yamaha flywheel degree timing key Also known as a woodruff key or timing key This goes on the crankshaft, and hold the flywheel in place at the correct position fits these models: Yamaha Warrior 350 1987-2004 Yamaha Raptor 250 2008-1013 Yamaha Raptor 350 204-2013 Yamaha Raptor 660 200

This is a set of 4 Yamaha Banshee tie rods ends. These go on the end of the tie rods, one on each side (one left hand one right hand). These are brand new aftermarket, with all new hardware, including ball joints, tie rod nuts, mounting nuts, and new rubber boots. Not rebuilt, brand new! In stock ...

This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, and looks very nice! Includes a one way vent hose with billet end cap that only allows air to enter the fuel tank to vent, and gas cannot leak out Please see our other listings for other available colors: ...

This is a BRAND NEW Vito's Performance front wheel bearing rebuild kit for a Yamaha Banshee, Raptor 700 660 350 250 125, Warrior, YFZ450, YFZ450r, and more! These are the front wheel bearings and seals Kit includes 4 x rear pre-greased sealed bearings, and 4 x dust seals as well This

This 2 rear axle castle hub nuts for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the the hubs onto the axle OEM quality, fit, size, and finish, at a fraction of the dealer price Also includes washers Fits: Yamaha Banshee 350cc 1987

Amazing quality! Read the reviews This is a set of 4 decals with adhesive aluminum backing plates Includes mounting rivets as well This is an exact duplicate of the factory Yamaha OEM warning labels Extremely high quality, and they are on an aluminum adhesive mount that the back peels off, and ...

This is a brand new billet aluminum Yamaha thumb throttle lever assembly by VITO'S PERFORMANCE Ready to install on any year Yamaha Banshee 1987-2006, and it will also fit a Blaster 200,Warrior 350, YFZ450, YFZ450r, Raptor 660, Raptor 700 replaces OEM Yamaha part # 3GG-26250-20-00 & 3GG-26250-00-00

This is TWO brand NEW Vito's Performance YAMAHA front shock mounting bolt kits This is the short bolt that hold the left + right shcoks to the suspension and frame This also includes the locking nuts this kit includes 4 x shock OEM style bolts 4 x locking OEM style nuts BRAND NEW, guaranteed to ...

This is a BRAND NEW rear 38 tooth sprocket. It will fit on any year Banshee 1989-2006 (6 prong finger hub) Also fits: 2001 to 2005 Raptor 660 1989-2006 Warrior 350 1987-2006 Blaster 200 - When using a 38 tooth sprocket your chain may rub on the fingers of the sprocket hub so you may need to file

This is a brand NEW Vito's Performance YAMAHA upper and lower lower a-arm mounting bolt ...

This is a BRAND NEW Yamaha Warrior / Blaster rear swingarm chain guide support The fits on the swingarm, and is where the chain goes through. Fits the following models: Blaster 200: 1988-2006 Warrior 350: 1987-2004 Raptor 250: 2004-2013 Ready to install! In stock, ready to ship Replaces Yamaha OE

This is a BRAND NEW steering stem lower bearing holder nut REMOVAL TOOL for a Yamaha Banshee or most Yamaha sport ATVs This easily removed the holder that screws into the frame, to keep the stem bearing in place FITS ANY YEAR OF THE FOLLOWING YAMAHA ATVs: Banshee 350 Big Bear 350 400 Bruin

This is a Stainless Steel rear rotor by Vito's Performance These have built in cooling channel slots to help prolong the life of your pads and rotor, and prevent rotor warping Ready to install on any year Yamaha Banshee 350 1987-2006. will also fit: 1995-2005 Yamaha Wolverine 2001-2005 Yamaha Rapto

This is a BRAND NEW set of 4 wheel studs for a Yamaha ATV sport quad Serrated tapered ends guarantee a good tight snug fit This will fit the front OR the rear of any of the following models Fits YAMAHA: Banshee 350 1987-2006 Raptor 700/700R 2006-2022 YFZ450R 2009-2022 YFZ 450 2004-2

This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, and looks very nice! Includes a one way vent hose with billet end cap that only allows air to enter the fuel tank to vent, and gas cannot leak out It will fit the following: 1984-1985 Tri-Moto 225 1985-1995 ...

This is a brand new product from Vito's Performance! It is a Billet aluminum rear brake caliper emergency block off plate includes allen head mounting bolts to replace the factory ones Fits any year Yamaha Banshee or YFZ450 This is used when you remove the parking brake assembly Also fits: Yamaha ...

This is a brand new DUAL GASSER thumb throttle lever / twist throttle assembly by VITO'S PERFORMANCE This allows you to use both a thumb throttle AND a twist throttle on the same ATV Uses your factory throttle cable - no need to buy a special one Switch quickly between either style on the fly, and ...

This is a BRAND NEW Yamaha swingarm nut, and washer by Vito's Performance Replaces OEM Yamaha part #: 90185-16002-00 and 90201-160F6-00 FITS: ATVS: Yamaha Banshee 1987-2006 Yamaha Raptor 350 2004-2013 Yamaha Raptor 660 2001-2005 Yamaha Raptor 700 2006-2020 Yamaha Warrior 350 1987-2004 YFZ450 2004-

This is for FOUR brand NEW Vito's Performance YAMAHA mounting bolts for a front bumper OR a rear grab bar fits OEM and aftermarket front and rear guards (bumper) BRAND NEW, guaranteed to fit the models below: Yamaha Banshee 350 - 1991-2006 Yamaha Blaster 200 - 1988-2006 Yamaha Warrior 350 - 1987-2