This is a brand new VITO'S PERFORMANCE carburetor carb top cable adjuster This is the piece that screws into the cap on top of the factory stock OEM carb on the TORS delete kit, it adjusts the cable Fits all Yamaha Blaster 200 and Banshee 350 ATVS (Banshees will have to order 2 for a full replaceme

This is a BRAND NEW Vito's Performance Yamaha Blaster carb rebuilt kit This includes everything to completely rebuild your 26mm Mikuni stock OEM carb Includes the exact items seen in the photos: bowl gasket, main jet, needle jet, seat, needle, orings, clips, springs, etc These will fit any year Yam

This is a set of BRAND NEW UPP Brand intake manifolds for an aftermarket Yamaha Blaster 200. The rubber intake boot is for aftermarket carbs, 34 mm or 35 mm oversize carbs, including Mikuni & Keihin Everything is still brand new in the package.

This is a BRAND NEW Yamaha Blaster 200 aftermarket larger carb 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the regular Keihin PW

This is a BRAND NEW 2004 -2009 and 2012-2013 Yamaha YFZ450 carb carburetor FCR 39mm flat slide Also includes a 10 piece jetting kit, with mains: 165, 170, 175, 180, 185 and pilots: 45, 50, 52, 55, and 58 Ready to install on a 2004 20052006 2007 2008 2009 2012 2013 YFZ450, 04 05 06 07 08 09 12 13 YF

This is a BRAND NEW carb choke lever from Vito's Performance Replaces OEM Part # 2GU-14171-00-00 This will only fit the Mikuni OEM factory stock carb, will not work for Keihin PWK carbs These will fit any year Yamaha Banshee or Blaster 1987-2006

This is a set of BRAND NEW Vito's Performance T.O.R.S. system removal carb caps Works on the stock Mikuni carburetor, it removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Blaster 1988-2006 With these aftermarket carb caps the carb i

This is a BRAND NEW Yamaha Blaster aftermarket larger carb 35mm kit Kit includes: 1 x 35mm Carb 1 x Vito's Performance thumb throttle cable 1 x K&N Style filter and clamp 1 x Outerwear pre filter 1 x JET kit with 10 different main jets (150, 152, 155, 158, 160, 162, 165, 168, 170, 172) 1 x U

This is a set of BRAND NEW carburetor hoses from Vito's Performance These will fit any year Yamaha Blaster 1988-2006 This kit includes all the hoses you need, from the gas tank, all the way to the overflow drain These are a clear translucent blue color, very sharp, and flexible, and will not break

This is a Yamaha Blaster 200 reed spacer kit - these are 5/16" thick These go right up against the cylinders and the carb boots. They are ready to install on ANY year Blaster 1988-2006. Includes all 4 allen head stainless steel bolts and also includes all gaskets required for install (most on eB

This is a BRAND NEW product by Vito's Performance! Brought back after a few years of hibernation, these are in stock, and ready to ship immediately! These are Vito's BULLSEYE billet aluminum reeds cages & CARBON FLEX black reeds Makes approx 1.2 horsepower over the stock ones, simply by bolting ...

This is a BRAND NEW Yamaha Raptor 660 or Yamaha YFZ450 swingarm pivot bolt, nut, and washer by Vito's Performance This is the bolt that goes through the frame and hold the swing-arm to the frame. It is very common for these to seize up inside the bushing tube Ready to install in any year YFZ 450 ...

This is a Brand NEW Vito's PJ choke plunger lever How many times to you pull your choke up,and it just slams right back down? This will fix your problem! Takes less than a minute to repair Fits ANY Keihin PJ carb models, such as 34 or 36 Comes from the factory on Honda 1985-1999 CR125 1985 CR250

This is a brand new Carburetor side cover plate with screws and o-rings. This is the cover on the side of the carburetor also fits: 2001 - 2005 Raptor 660 2002 - 2008 Grizzly 660 2008 - current Raptor 250 2004 - current Raptor 350 2011 - current Raptor 125 Replaces these OEM Yamaha part numbers: 4W

This is a BRAND NEW Vito's Performance Yamaha YFZ450 carb rebuilt kit This includes everything to completely rebuild your stock carb Includes the exact items seen in the photos: bowl gasket, size 155 main jet, 48 pilot jet, needle jet, seat, needle, bowl oring, etc These will fit any year Yamaha YF

This is BRAND NEW OEM pair of carb intake boots for a Yamaha Raptor 660 Raptor These go right between the cylinder and the carb You get 2 boots, one left, and one right, with matching o-rings Its ready to install on ANY year Yamaha Raptor 660 660R 2001 20022003 2004 2005 Still new in the packaging

This is a Brand NEW KEIHIN choke plunger lever How many times to you pull your choke up,and it just slams right back down? This will fix your problem! Takes less than a minute to repair Fits ANY PWK carb models, such as 28mm 33mm 35mm 36mm 38mm 39mm 41mm Fits the standard OR the Airstriker models

This is a BRAND NEW aftermarket Vito's Performance Yamaha Blaster 200 rear axle. This is the same size as a stock unit, and it is a bolt on replacement for your old rusty or bent axle It is heat treated to be stronger than the stock unit its designed to replace It will fit any year Yamaha Blaster

This is a PAIR of Vito's Performance MAIN HEX JETS for a Mikuni carburetor size: 200 We use them for Banshee and Blaster carbs quantity: 1 pair = 2 total jets if you buy 3 pairs at once, then we will throw in a 4th pair for free! Replaces: VM4/042/200 Fitment information: Mikuni Carburetors: VM18,

This is a BRAND NEW Vito's Performance Blaster idle screw & install kit This comes with everything you need to install an idle screw onto your Yamaha Blaster 200 Includes 1 brass idle screws with jamb nut to lock it into place so it will not back out Also includes drill bit and thread tap to modif

This is a BRAND NEW aftermarket swingarm bearing carrier kit for a Yamaha BLASTER 2003-2006 Fits only 2003-2006, and is BRAND NEW, factory OEM genuine YAMAHA This kit includes the housing, spacer collar, spacer tube, bearings, and dust seals Bearings and seals are from Vito's Performance, the res

This is a set of BRAND NEW Vito's Performance T.O.R.S. removal system Works on the stock Mikuni carburetor, are removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Blaster 1988-2006 With the aftermarket carb cap the carb is much easie

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable This carb has the multi-color TITANIUM look to it Also has the upgraded billet aluminum choke lever The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable UNI brand 2 stage clamp on filter JET kit including 10 different main jets (150, 152, 155, 158, 160, 162, 165, 168, 170, 172) The carb is not a Keihin brand carburetor, but it uses s

This is a BRAND NEW 28mm PWK style carb w/ vent lines The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 28mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable UNI brand 2 stage clamp on filter The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 34mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW kit that includes: 34mm PWK style carb w/ vent lines Vito's Performance thumb throttle cable K&N Style reusable air filter The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

This is a BRAND NEW 34mm PWK style carb w/ vent lines The carb is not a Keihin brand carburetor, but it uses standard Keihin style jets.

Blaster GENUINE Keihin PWK33 Carb Calibrated To The Cy240 Big Bore Cylinder Only Includes Thumb Cable And Spare Tuning Jets Remember: The larger the Carburetor the more peak power with a loss of bottom end power and ...

Blaster Keihin GENUINE Pwk35 Carb Calibrated for CY240K cylinder only Includes Thumb Cable And Spare Tuning Jets Remember: The larger the Carburetor the more peak power with a loss of bottom end power and ...

This is ONE (1) brand new 2 stage UNI foam air filter These are 6" long, and fit any aftermarket carburetors 28mm - including Keihin or Mikuni PJ and PWK carbs This filter has a 10 degree angled neck so that the filters fit more level, and avoid the pipes better. Perfect for that 2:1 sing

This is a BRAND NEW factory original YAMAHA OEM upper a-arm mounting bolt. This is the long bolt that hold the left or right top a-arms to the frame. will fit a Yamaha Raptor 660 660r 01 02 03 04 05 2001 2002 2003 2004 2005 Will NOT fit the fuel injected 700 Raptor models, only 660cc Raptors This

A BRAND NEW voltage regulator for a Yamaha Blaster or Banshee This is a direct replacement for your factory stock unit. This is what keep your headlights from blowing or "popping" when you rev up the ATV This will fit any 1987-2006 YFZ350 Yamaha Banshee or Blaster 200 We guarantee it will

This is a PAIR of rear axle nuts for any year Yamaha Banshee 350 or Blaster 200 Brand new from VITO'S PERFORMANCE This is the part that holds the axle, carrier, rear brake rotor, and rear sprocket hub together OEM quality, fit, size, and finish, at a fraction of the dealer price You get 2 units,

This is a Yamaha Blaster Exhaust seal gasket from VITO's PERFORMANCE This goes between the cylinder and the exhaust pipe It replaces Yamaha OEM part # 3PA-14613-10 Fits any year 1988 to 2006 Will also fits the models below: RT110 RT180 1992 BLASTER - YFS200D EXHAUST 1992 BLASTER - YFS200D_MN EXHAUS

This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, and looks very nice! Includes a one way vent hose with billet end cap that only allows air to enter the fuel tank to vent, and gas cannot leak out Please see our other listings for other available colors: ...

This is a complete set of NEW carbon flex intake reeds by Vito's Performance They offer crisper throttle response, and a general overall increase in usable horsepower over the stock reeds These are dual stage, so you can gain top end power without sacrificing lower end grunt These flow more gas an

This is a BRAND NEW nut for a Yamaha Banshee from Vito's Performance This is what holds the flywheel to the engine (crankshaft) fits year Yamaha Banshee 350, Blaster 200, or YFZ450 carb or EFI models also fits Yamaha YZ450F, WR250F, WR250R, YFZ450R, YZ250F, MINT SHAPE, brand new, ready to use! Re

Amazing quality! Read the reviews This is a set of 4 decals with adhesive aluminum backing plates Includes mounting rivets as well This is an exact duplicate of the factory Yamaha OEM warning labels Extremely high quality, and they are on an aluminum adhesive mount that the back peels off, and ...

This is a brand new Pair of (2) carburetor bowl gaskets (float chamber) They will fit a Yamaha Banshee or a Yamaha Blaster fits any year 1987-2006 This only fits the OEM factory stock Mikuni carbs (will not fit Keihin) Also fits other VM24 - VM26 carbs Replaces OEM: 304-14184-00-00

This is a complete Yamaha Banshee rear taillight and brake light with mounting bracket It will fit any year 2002-2006 Banshee, and the bracket, and all required grommets for installation is included It will also fit the models below: 2002-2006 BANSHEE 350 2002-2005 BEARTRACKER 2002-2005 BIG BEAR (2

This is a brand new Yamaha Blaster 200 kick starter NUT This is what holder the kickstart onto the ATV This is a brand new OEM factory Yamaha part This will fit any year Yamaha Blaster 1988-2006

This is a pair of (2) Banshee carburetor rubber boot clamps These are genuine Yamaha OEM factory parts! New in packaging These are the clamps that connect the carbs to the intake boots on the cylinder Its ready to install on ANY year Yamaha Banshee 1987-2006 (also fits Blaster 1988-2004)

This is a BRAND NEW aftermarket shifter from Vito's Performance This steel model is BLACK, and has a durable black gloss finish Ready to install on any year Yamaha Blaster 200, 1988-2006. This is a folding shifter lever, it has a spring loaded toe pad, that helps prevents breaks and bending from

This is ONE (1) brand new 2 stage UNI foam air filter These are 6" long, and fit any aftermarket carburetors 33mm or 34mm or 35mm - including Keihin or Mikuni PJ and PWK carbs Perfect for that 2:1 single carb setup on your Banshee, or 250R WILL NOT FIT STOCK BANSHEE or BLASTER CARBS! We have ones t

This is a BRAND NEW Yamaha Blaster swingarm pivot bolt, nut, and washer from Vito's Performance. This is the steel bolt that goes through the frame and holds the swingarm onto the frame Ready to install in any year Yamaha Blaster 200, Raptor 125, or Raptor 250

This is BRAND NEW OEM factory stock Yamaha blaster intake rubber boot These go right between the cylinder and the carb Its ready to install on ANY year Yamaha Blaster YFS200 1988-2006 Still new in the packaging!