yamaha-yfz450-2005 - Shop and Buy at Discount Prices

yamaha-yfz450-2005

NEW Vito
This is a BRAND NEW Vito's Performance aluminum rear desert style WIDE grab bar. fits Yamaha YFM660r Raptor 660 and YFZ 450 This is the WIDE DESERT style, makes for much easier lifting and moving of the ATV Made from high quality heast treated T6 aluminum Comes with strong corner flag ...
New Yamaha Blaster Flywheel Degree Timing Key Woodruff Oem Factory 1987-2006
This is a NEW genuine OEM Yamaha Blaster 200 flywheel degree timing key Also known as a woodruff key or timing key This goes on the crankshaft, and hold the flywheel in place at the correct position It will work on any year Blaster 1988 - 2006 or YFZ450 2004 ...
NEW 2 x Vito
This is a pair of  BRAND NEW Vito's Performance Yamaha Banshee 350 rear wheel hubs. This is for both sides (you get one matched pair) Will also fit a YFZ450, Raptor 660 700 350 250, or a Warrior axle and bolt pattern. These will also fit a Yamaha Blaster axle, so you can convert ...
12 x BUSHING KIT upper + lower a-arm Banshee Raptor 700 660 YFZ450 Blaster NEW
This is a BRAND NEW Yamaha Banshee upper + lower  a-arm bushing replacement kit from Vito's Performance Includes 12 a-arm bushings This kit will replace all bushings in all 4 a-arms Includes enough to do FOUR (4) a-arms - both LEFT and RIGHT, upper and lower: 12 x ...
2 x Vito
This 2 rear axle castle hub nuts for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the the hubs onto the axle OEM quality, fit, size, and finish, at a fraction of the dealer price Also includes ...
Vito
This is a BRAND NEW flywheel puller by VITO's PERFORMANCE 33.00mm x 1.5mm   fits: Suzuki GSXR600 & GSXR750 Models Polaris Predator 500 03-06 Models GSXR 750 01-05 GSXR 600 01-05 WR 450F 04 and up YFZ 450 04-09 GSXR 1000 01-05 KTM 625 SMC 06 640 LC4 Adventure 04-07 640 LC4E ...
Vito
This is for 2 x brand NEW Vito's Performance YAMAHA upper a-arm mounting bolt kit This is the long bolt that hold the left or right top a-arms to the frame. This also includes the washers and locking nuts   kit includes: 1.  2 bolts 2.  2 washer s 3.  2 lock ...
Oil Mod Upgrade Kit: New Yamaha YFZ450 Oil Squirter And O-Ring 5D3-15155-00-00
This is a new Yamaha YFZ450 engine side crankcase oil squirter upgrade kit Includes the oil squirter and the oring   aka "oil mod" OEM oil squirter that will fit 2004-2009 carb model yfz450 atvs   You will need your cases modified to fit on a 2004, 2005, or 2006 YFZ 450 ...
New 2004 2005 Yamaha YFZ 450 Switch On Off Run Start Stop Headlight YFZ450
This is a BRAND NEW 2004-2005 Yamaha YFZ450 headlight on/off switch. This also has the run, on off killswitch, and the button for the starter. Ready to install on a 2005 or 2005 YFZ450, 04 or 05 YFZ 450. Yamaha factory OEM stock - brand new! ...
Vito
This is a brand NEW Vito's Performance YAMAHA upper and lower lower a-arm mounting bolt kit This is the short and long bolts that hold the left and right bottom a-arms to the frame. This also includes the washer and locking nut There is enough in this kit do do both upper and both lower ...
New Vito
This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, and looks very nice! Includes a one way vent hose with billet end cap that only allows air to enter the fuel tank to vent, and gas cannot leak out ...
New Vito
This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, with Logo and looks very nice! Includes a one way vent hose with billet end cap that only allows gas air to enter the fuel tank to vent, and gas cannot leak out ...
New Vito
This is a BRAND NEW Yamaha Banshee upper + lower  a-arm bushing replacement kit This kits replaces 4 arms total! Includes enough to do FOUR (4) a-arms - both LEFT and RIGHT, upper and lower: 6 x Bolt tube 12 x Bushings 12 x Dust caps We have more kits avail be in our other ...
New Radiator Fluid Reservoir Coolant Bottle Overflow
This is a 2004 -2008 Yamaha YFZ450 radiator fluid overflow reservoir coolant bottle with hoses / lines. Ready to install on a 2004 2005 206 2007 2008 YFZ450, 04 05 06 07 08  YFZ 450, or YFZ450X Also fits a Yamaha Raptor 660 660r ...
2 X New Vito
This is a BRAND NEW Yamaha Banshee lower a-arm bushing replacement kit Fits any Yamaha Banshee 1991-2006, Raptor 700, Raptor 660, or YFZ450, Blaster, Warrior, etc (see list below) Includes enough to do TWO (2) lower a-arms - both LEFT AND RIGHT: 4 x Bolt tube 8 x Bushings 8 x Dust caps ...
New Genuine Oem Shifter Shift Shaft Rod Spline
This is an OEM factory YAMAHA part - BRAND NEW This is a 2004-2009, 2012-2013  Yamaha YFZ450 shift shaft This is what the shifter lever attaches to Ready to install on a 2004 2005 2006 2007 2008 2009 2012 2013 (carb models) YFZ450, 04 05 06 07 08 09 12 03 YFZ 450 (carb model ...
2 X New Vito
This is a BRAND NEW Yamaha Banshee upper a-arm bushing replacement kit Includes enough to do TWO (2) upper a-arms - both LEFT and RIGHT: 2 x Bolt tube 4 x Bushings 4 x Dust caps We have more kits avail be in our other listings, to do one or both a-arms, as well as kits available to do ...
New Oem Factory Yamaha YFZ450 Fuel Petcock Gas Tank Switch 2004-2009 2002-2013
This is a NEW complete Yamaha YFZ 450 fuel petcock for the gas tank. This item is brand new, directly from YAMAHA, and an original OEM factory piece. It has never been used, and will fit any year 2004-2009 YFZ450, also the 2012 and 2013 It's the selector switch that you can set to ON, OFF, ...
Vito
This is a complete swingarm bearing & seal rebuilt kit for the front of your Yamaha YFZ450 rear swingarm by Vito's Performance All brand new, ready to install in any year, 2004-2009 (carb models), and also 2012 and 2013 You get all 14 required pieces: 4 Needle Bearings 2 Needle Bearing ...
Vito
This is a set of BRAND NEW Vito's Performance Easy adjust clutch lever High quality, Forged, lightweight perch is perfect for any application This is also used to remove the emergency brake cable setup on the factory Banshee ...
Vito
This is a brand NEW Vito's Performance YAMAHA upper and lower lower a-arm mounting bolt kit   This kit has the short and long bolts that hold the left and right bottom a-arms to the frame. This also includes the washers and locking nuts, and dust spacer caps   There is enough ...
New 2004 2005 Yamaha YFZ450 Complete Factory Oem Wiring Harness Loom And Plugs
This is a BRAND NEW OEM FACTORY wiring harness for a 2004-2005 Yamaha YFZ450 This is complete, with all the plugs for the headlights, key, brakes, etc Ready to install on a 2004 or 2005 YFZ450, 04 or 05 YFZ 450. ...
2 X NEW tie rods end ball joints left right Yamaha Banshee YFZ450 raptor warrior
This is a pair of 2 Yamaha Banshee tie rods ends. These go on the end of the tie rods, one one each side (one left hand one right hand). These are brand new aftermarket, with all new hardware, including ball joints, tie rod nuts, mounting nuts, and new rubber boots. Not rebuilt, brand new! ...
New 2 X Grab Bar Rear Fender Mount Brackets
This is a set of 2 x 2004 -2009 ...
New Airbox Lid Yamaha YFZ450 Oem YFZ 450 2004-2009 2012 2013
This is a BRAND NEW 2004-2009 Yamaha YFZ450 factory OEM stock airbox lid only This is a factory OEM Yamaha part. Unopened. Will only fit carburetor models, not EFI Fits a 2004 2005 2006 2007 2008 2009 2012 2013 YFZ450, 04 05 06 07 08 09 12 13 YFZ 450. ...
TPS Throttle Position Sensor Raptor 700 2008-2018 Raider road star 8GL-85885-00
This is a BRAND NEW Vito's Performance TPS Throttle Positioning Sensor This throttle sensor assembly is over $102.99 new from Yamaha This replaces OEM Yamaha part number 8GL-85885-00-00 Fits Raptor 700 2008-Current   ...
New 2004-2005 Yamaha YFZ450 Rear Brake Light Taillight Bracket 5Tg-84702-00-00
This is a 2004 or 2005 Yamaha YFZ450 rear taillight / brake light mounting bracket Will work on any 04 or 05 YFZ 450 Brand new Yamaha OEM factory part - new in package ...
1 X Vito
This ONE rear axle castle nut for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the the hubs onto the axle OEM quality, fit, size, and finish, at a fraction of the dealer price Also includes ...
Vito
This is a brand NEW Vito's Performance YAMAHA upper a-arm mounting bolt kit This is the long bolt that hold the left or right top a-arms to the frame. This also includes the washer and locking nut   kit includes: 1. bolt 2. washer 3. lock ...
New 2004-2009 Yamaha YFZ450 YFZ 450 Ignition Coil Spark Plug Cap
This is a BRAND NEW aftermarket Yamaha YFZ450 ignition coil This is also the spark plug boot cap. Ready to install on a 2004 2005 2006 2007 2008 YFZ450, 04 05 06 07 08 YFZ 450. These are $134.32 new at the dealership! Replaces Yamaha oem part # ...
Vitos Performance Yamaha YFZ450 Adjustable Fuel Air Mixture Screw Upgraded Brass
This is a brand new Vito's Performance 20045-2009 YFZ450 fuel air mixture screw This is the EASIEST and quickest way to adjust your fuel/air mixture ratio No tools needed - adjust on the fly, right on the trails or track! ...
Vito
This is a BRAND NEW front brake lever from Vito's Performance will fit MANY different ...
YFZ 450 JET KIT Stage 1-2 mains needle 2004-2009 carb yfz450 + thumb air screw
This is a full VITO'S PERFORMANCE JETTING KIT! Includes: Main jets: 160, 165, 170, 175, 180 custom VITO's Performance Needle RED Air fuel mixture adjustment screw THIS LISTING IS FOR A BRAND NEW VITO'S JET KIT FOR ALL YEAR YAMAHA YFZ450's WITH KEIHIN FCR CARBURETOR. THIS KIT INCLUDES A WIDE ...
Keihin Series 21 Pilot Jet
Keihin Series 21 Pilot ...
Vito
By VITO's Performance   This is an aftermarket HIGH PERFORMANCE clutch fiber friction plate and steel plates and spring kit for your Yamaha YFZ450 2004-2006   Perfect for modified bikes (or stock bikes) - the springs are 15% stronger than stock, so they can handle more HORSEPOWER ...
Keihin Hex Main Jet
Keihin Hex Main ...
Vito
This is a genuine VITO'S PERFORMANCE new part!  You get one pair of 2 Yamaha OEM front rotors. Ready to install on any year Banshee 1987-2006. ...
Vito
Brand New foam style ATV Air Filter - direct replacement for OEM stock air filter : 5TG-14451-00-00 Fits the factory airbox ...
Vito
This is a BRAND NEW front brake lever from Vito's Performance will fit MANY different ...
Vito
* This listing includes brackets for the rear fenders as well!   This is a BRAND NEW Vito's Performance aluminum rear desert style WIDE grab bar. fits Yamaha YFM660r Raptor 660 and YFZ 450 This is the WIDE DESERT style, makes for much easier lifting and moving of the ATV Made from ...
1 X New Vito
This is a BRAND NEW Yamaha Banshee upper a-arm bushing replacement kit Includes enough to do ONE (1) upper a-arm - either LEFT or RIGHT: 1 x Bolt tube 2 x Bushings 2 x Dust caps We have more kits avail be in our other listings, to do both a-arms, as well as kits available to do all 4 ...
New Yamaha YFZ450 Lower A-Arm Top Shifter Side 2004-2009 Left Right Raptor 700
Please see the description below to determine the correct side before placing your order: If you are sitting on the ATV, this is the one on the left side. If you are looking at the front of the ATV, this is on the right side Or to simplify, this the lower A-Arm that is located on the ...
1 X New Vito
This is a BRAND NEW Yamaha Banshee lower a-arm bushing replacement kit Fits any Yamaha Banshee 1991-2006, Raptor 700, Raptor 660, or YFZ450, Blaster, Warrior, etc Includes enough to do ONE (1) lower a-arm - either LEFT or RIGHT: 2 x Bolt tube 4 x Bushings 4 x Dust caps We have more kits ...
Vitos Performance Oem Size Aftermarket Axle Yamaha YFZ450 2004-2009 Heat Treated
This is a BRAND NEW aftermarket Yamaha YFZ450 rear axle. This is a stock replacement axle, same size as the factory unit It is heat treated, and stronger than the stock unit its designed to replace It will fit any year Yamaha YFZ450 2004-2009, but the nuts on the end are designed for the ...
Vito
This is a set of BRAND NEW Vito's Performance thumb throttle cable for a YFZ450   This is for the THUMB throttle setup, and will NOT work for the TWIST setup.   Replaces Yamaha OEM stock factory parts #: ...
New Yamaha YFZ450 Lower A-Arm Top Brake Lever Side 2004-2009 Right Raptor 700
Please see the description below to determine the correct side before placing your order: If you are sitting on the ATV, this is the one on the right side. If you are looking at the front of the ATV, this is on the left side Or to simplify, this the upper A-Arm that is located on the ...
Rear brake caliper REBUILD KIT 1987-2006 Yamaha Banshee Warrior Raptor 660
This is a BRAND NEW rear rebuild kit for a rear caliper for a 1987-2006 Yamaha Banshee by Vito's Performance This kit is brand new and includes all the pieces you need to rebuild your rear brake caliper   You get the ACTUAL kit shown in the ...
My Account