yamaha-yfm660r raptor-2004 - Shop and Buy at Discount Prices

yamaha-yfm660r raptor-2004

NEW Vito
This is a BRAND NEW Vito's Performance aluminum rear desert style WIDE grab bar. fits Yamaha YFM660r Raptor 660 and YFZ 450 This is the WIDE DESERT style, makes for much easier lifting and moving of the ATV Made from high quality heast treated T6 aluminum Comes with strong corner flag ...
NEW 2 x Vito
This is a pair of  BRAND NEW Vito's Performance Yamaha Banshee 350 rear wheel hubs. This is for both sides (you get one matched pair) Will also fit a YFZ450, Raptor 660 700 350 250, or a Warrior axle and bolt pattern. These will also fit a Yamaha Blaster axle, so you can convert ...
12 x BUSHING KIT upper + lower a-arm Banshee Raptor 700 660 YFZ450 Blaster NEW
This is a BRAND NEW Yamaha Banshee upper + lower  a-arm bushing replacement kit from Vito's Performance Includes 12 a-arm bushings This kit will replace all bushings in all 4 a-arms Includes enough to do FOUR (4) a-arms - both LEFT and RIGHT, upper and lower: 12 x ...
Vito
This is a set of brand new Vito's Performance 2001-2005 Yamaha Raptor 660r 660 fuel air mixture screws This is the EASIEST and quickest way to adjust your fuel/air mixture ratio No tools needed - adjust on the fly, right on the trails or track! These fit the factory stock Mikuni carbs ...
2 x Vito
This 2 rear axle castle hub nuts for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the the hubs onto the axle OEM quality, fit, size, and finish, at a fraction of the dealer price Also includes ...
Vito
This is for 2 x brand NEW Vito's Performance YAMAHA upper a-arm mounting bolt kit This is the long bolt that hold the left or right top a-arms to the frame. This also includes the washers and locking nuts   kit includes: 1.  2 bolts 2.  2 washer s 3.  2 lock ...
3 X Rear Sprocket Bolt Lock Plate Tab Washer
This kit includes 3 units   This is a brand new rear sprocket bolt lock plate tab washer This is what keeps your sprocket nuts from backing off the hub.   Replaces Yamaha factory OEM # ...
Vito
This is a BRAND NEW YFM660r Raptor 660 aluminum rear grab bar. Made from high quality heat treated T6 aluminum Comes with flag mount for the sand dunes, as well as taillight mounts & number plate mounts This listing includes all mounting hardware for the bumper as well Beautiful ...
Vito
This is a brand new rear sprocket gear hub STUD & NUT KIT kit by Vito's Performance This replaces the factory OEM studs and nuts on the rear sprocket hub These are what hold and keep the sprocket on!   Includes: 6 x rear sprocket hub studs 6 x rear sprocket hub ...
Vito
This has been CHROMED, and looks awesome! Pics don't do it justice   This is a BRAND NEW aftermarket Yamaha YFM660r Raptor 660 rear axle. This is 2 inches wider than the factory axle - giving the (already top heavy) ATV a much needed more stable position It is heat treated, and ...
New Vito
This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, and looks very nice! Includes a one way vent hose with billet end cap that only allows air to enter the fuel tank to vent, and gas cannot leak out ...
Vitos High Performance Clutch Fibers Kit Friction Plates Yamaha Raptor 660 01-05
By VITO's Performance   This is an aftermarket HIGH PERFORMANCE clutch fiber friction plate and steel plates and spring kit for your Yamaha Raptor 660r   Perfect for modified bikes (or stock bikes) - the springs are 15% stronger than stock, so they can handle more HORSEPOWER ...
New Vito
This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, with Logo and looks very nice! Includes a one way vent hose with billet end cap that only allows gas air to enter the fuel tank to vent, and gas cannot leak out ...
Vito
This is a Stainless Steel rear rotor by Vito's Performance These have built in cooling channel slots to help prolong the life of your pads and rotor, and prevent rotor warping Ready to install on any year Yamaha Banshee 350 1987-2006. ...
Vito
This is a BRAND NEW rear 38 tooth sprocket. It will fit on any year Banshee 1989-2006 (6 prong finger hub)   - When using a 38 tooth sprocket your chain may rub on the fingers of the sprocket hub so you may need to file a flat on the hub fingers so the chain will ...
New Radiator Fluid Reservoir Coolant Bottle Overflow
This is a 2004 -2008 Yamaha YFZ450 radiator fluid overflow reservoir coolant bottle with hoses / lines. Ready to install on a 2004 2005 206 2007 2008 YFZ450, 04 05 06 07 08  YFZ 450, or YFZ450X Also fits a Yamaha Raptor 660 660r ...
Vito
This is a complete rebuilt kit for the front of your Raptor 660 swingarm by Vito's Performance All brand new, ready to install in any year; You get all 18 required pieces: 2 Needle Bearings 2 Needle Bearing Shafts 5 Seals 1 Bronze Bushing 2 Delrin Bushings 4 Washers 2 Thrust ...
Vito
This is a set of BRAND NEW Vito's Performance Easy adjust clutch lever High quality, Forged, lightweight perch is perfect for any application This is also used to remove the emergency brake cable setup on the factory Banshee ...
Vito
This is a brand new Yamaha Raptor 660 or 700 thumb throttle lever assembly by VITOS PERFORMANCE Ready to install on any year Raptor 660 or 700 2001-2017, and it will also fit a Raptor 350, 250, 125, Wolverine, Big Bear, Breeze, or Kodiak etc Replaces OEM Yamaha part # 4KB-26250-00-00 and ...
2 X NEW tie rods end ball joints left right Yamaha Banshee YFZ450 raptor warrior
This is a pair of 2 Yamaha Banshee tie rods ends. These go on the end of the tie rods, one one each side (one left hand one right hand). These are brand new aftermarket, with all new hardware, including ball joints, tie rod nuts, mounting nuts, and new rubber boots. Not rebuilt, brand new! ...
New 2 X Grab Bar Rear Fender Mount Brackets
This is a set of 2 x 2004 -2009 ...
New Aftermarket Radiator Yamaha Raptor 660 Aluminum 2001-2005 Oversized
Ships from the USA!   This is a brand new complete Yamaha Raptor 660 or 660r aftermarket HIGH CAPACITY aluminum radiator. will fit any year 2001-2005, and will keep your quad cooler than a factory unit. This holds 30% more liquid than a factory unit, and still retains the original ...
1 X Vito
This ONE rear axle castle nut for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the the hubs onto the axle OEM quality, fit, size, and finish, at a fraction of the dealer price Also includes ...
Vito
This is a brand NEW Vito's Performance YAMAHA upper a-arm mounting bolt kit This is the long bolt that hold the left or right top a-arms to the frame. This also includes the washer and locking nut   kit includes: 1. bolt 2. washer 3. lock ...
Vito
This is a BRAND NEW front brake lever from Vito's Performance will fit MANY different ...
Mikuni N102 Small Round Main Jet
Mikuni N102 Small Round Main ...
New Rear Axle Carrier Spacer Tube
This is a BRAND NEW swingarm bearing carrier SPACER TUBE for a Yamaha Banshee or Yamaha Raptor 660 This is the piece that the axle slides through inside the rear bearing carrier replaces oem Yamaha part # ...
Vito
This is a genuine VITO'S PERFORMANCE new part!  You get one pair of 2 Yamaha OEM front rotors. Ready to install on any year Banshee 1987-2006. ...
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Carrier / 4"
* This kit includes Vito's Performance round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the ROUND STYLE BEARING CARRIER This ...
Vito
This is a BRAND NEW front brake lever from Vito's Performance will fit MANY different ...
New Vito
This is a brand new CHROME screw on oil filter for a Yamaha Raptor 660 ATV This really dresses up your bike, and since it is usually BLACK, the chrome model really stands out! High quality filtration cleaning, our products meet or exceed Yamaha standards Ready to install on a 2001 2002 2003 ...
Vito
* This listing includes brackets for the rear fenders as well!   This is a BRAND NEW Vito's Performance aluminum rear desert style WIDE grab bar. fits Yamaha YFM660r Raptor 660 and YFZ 450 This is the WIDE DESERT style, makes for much easier lifting and moving of the ATV Made from ...
New Raptor 660 Upper A-Arm Mounting Bolt Top Left Right 2001 2002 2003 2004 2005
This is a BRAND NEW factory original YAMAHA OEM upper a-arm mounting bolt. This is the long bolt that hold the left or right top a-arms to the frame. will fit a Yamaha Raptor 660 660r 01 02 03 04 05 2001 2002 2003 2004 2005 Will NOT fit the fuel injected 700 Raptor models, only 660cc ...
Vito
This is a BRAND NEW aftermarket Yamaha YFM660r Raptor 660 rear axle. This is a stock replacement axle, same size as the factory unit It is heat treated, and stronger than the stock unit its designed to replace It will fit any year Yamaha Raptor 660r This uses all the stock components ...
New Tyson Racing Yamaha Raptor 660 2001-2005 Swingarm 660R Extended Chromoly / 6"
This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been ...
New Tyson Racing Yamaha Raptor 660 2001-2005 Swingarm 660R Extended Chromoly / 4"
This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been ...
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 6"
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the ...
Mikuni N224 Pilot Jet
Mikuni N224 Pilot ...
Mirror Polish Vito
This is a brand new Yamaha Raptor 660 or 700 thumb throttle lever assembly by Vitos Performance! Ready to install on any year Raptor 660 or 700 2001-2020, and it will also fit a Raptor 350 250 125 Wolverine Big Bear Breeze or Kodiak etc Replaces OEM Yamaha part # 4KB-26250-00-00 and ...
Rear brake caliper REBUILD KIT 1987-2006 Yamaha Banshee Warrior Raptor 660
This is a BRAND NEW rear rebuild kit for a rear caliper for a 1987-2006 Yamaha Banshee by Vito's Performance This kit is brand new and includes all the pieces you need to rebuild your rear brake caliper   You get the ACTUAL kit shown in the ...
1 X Vito
This is ONE BRAND NEW Vito's Performance Yamaha Banshee 350 rear hub Will also fit a YFZ450, Raptor 660 700, or a Warrior axle and bolt pattern. These will also fit a Blaster axle, so you can convert your Blaster to the Banshee bolt pattern rims. Ready to install on any year. Bolt ...
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 2"
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +2" This accepts the ...
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 8"
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a  BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +8" This ...
Vito
This is a set of BRAND NEW Vito's Performance thumb throttle carburetor cable Fits any of the stock carbs setups, from any year 660 Raptor This is for the THUMB throttle setup, and will NOT work for the TWIST setup. ...
Valve Spring Retainer-Keeper - Two Required Per Valve
Valve Spring Retainer-Keeper - Two Required Per ...
Rear Sprocket Bolt Lock Plate Tab WasherOLD
This is a brand new rear sprocket bolt lock plate tab washer This is what keeps your sprocket nuts from backing off the hub. Each unit requires 3 of them Replaces Yamaha factory OEM # ...
Namura Yamaha Raptor 660 Full Top End Gasket Kit YFM660R NA-400004T 2001-2005
This is a brand new NAMURA Gasket kit fits 2001-2005 Raptor 660 engine - YFM660r, as well as most Rhino and Grizzly motors 2001 2002 2003 2004 2005 Includes all gaskets, valve seals, and o-rings for a complete top end overhaul rebuild Fits 100mm to 102mm motors (that includes big bore ...
New Tyson Racing Yamaha Raptor 660 2001-2005 Swingarm 660R Extended Chromoly / 8"
This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +8" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been ...
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 10
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +10" This accepts the ...
My Account