This is a set of BRAND NEW Vito's Performance T.O.R.S. removal system Works on the stock Mikuni carburetors, are removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Banshee 1987-2006. With these aftermarket carb caps the carbs are ...

This is a BRAND NEW 2004 -2009 and 2012-2013 Yamaha YFZ450 carb carburetor FCR 39mm flat slide Also includes a 10 piece jetting kit, with mains: 165, 170, 175, 180, 185 and pilots: 45, 50, 52, 55, and 58 Ready to install on a 2004 20052006 2007 2008 2009 2012 2013 YFZ450, 04 05 06 07 08 09 12 13 ...

This is a set of BRAND NEW Vito's Performance thumb throttle dual carburetor cable Fits any 28-35mm Keihin carbs including 28mm 29mm 30mm 31mm 32mm 33mm 34mm 35mm PWK or PJ series This is for the THUMB throttle setup, and will NOT work for the TWIST setup. This will also fit the stock 26mm Mikun

This is a set of BRAND NEW Vito's Performance T.O.R.S. removal system Works on the stock Mikuni carburetor, are removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Blaster 1988-2006 With the aftermarket carb cap the carb is much ...

This is a brand new Yamaha Banshee thumb throttle lever assembly by VITO'S PERFORMANCE Ready to install on any year Yamaha Banshee 1987-2006, and it will also fit a Blaster 200 or Warrior 350. This is for one with the wire attached, but please check your plug style first replaces OEM Yamaha part #

This is a brand new billet aluminum Yamaha thumb throttle lever assembly by VITO'S PERFORMANCE Ready to install on any year Yamaha Banshee 1987-2006, and it will also fit a Blaster 200,Warrior 350, YFZ450, YFZ450r, Raptor 660, Raptor 700 replaces OEM Yamaha part # 3GG-26250-20-00 & 3GG-26250-00-00

This is a BRAND NEW Vito's Performance thumb throttle carburetor cable Works on the stock factory OEM Mikuni carburetors Will NOT work for carbs that have had the TORS removed and the idle kit installed These will fit any year Yamaha Banshee 1987-2006 This is for the THUMB throttle setup, and wil

This is a brand new DUAL GASSER thumb throttle lever / twist throttle assembly by VITO'S PERFORMANCE This allows you to use both a thumb throttle AND a twist throttle on the same ATV Uses your factory throttle cable - no need to buy a special one Switch quickly between either style on the fly, and

This is a BRAND NEW CR Twist kit for a Yamaha Banshee by Vito's Performance This is for a Yamaha Banshee (or any ATV) running Mikuni carbs Will also fit STOCK carbs if you have the TORS REMOVAL KIT installed Comes complete with: 1. Twist throttle setup - 101242 2. twist throttle cable 3. Rubber gri

This is a BRAND NEW Twist cable for a Yamaha Banshee by Vito's PerformanceTHis cable can only be used for twist setups, and will not work with the OEM thumb throttle setupThis is for a Yamaha Banshee running Keihin carbsWill also fit STOCK carbs if you have the TORS REMOVAL KIT installe

This is a BRAND NEW Vito's Performance thumb throttle carburetor cable Works on the stock factory OEM Mikuni carburetor that has had the TORS removed (Will not work with stock TORS) This will also fit a Keihin PWK 28 29 30 32 33 34 or 35mm carb as well These will fit any year Yamaha Blaster 1988-2

This is extended +2" LONGER than stock This Is A Set Of Brand New Vito's Performance Thumb Throttle Dual Carburetor Cable Fits Any 28-35Mm Keihin Carbs Including 28Mm 29Mm 30Mm 31Mm 32Mm 33Mm34mm 35Mm Pwk Or Pj Series This Is For The Thumb Throttle Setup, And Will Not Work For The Twist Setup. ...

This is a brand new HONDA thumb throttle lever assembly by VITO'S PERFORMANCE This has been polished to a mirror like finish shine Ready to install on any year HONDA 250r 300ex 400ex 450r, etc It will work on just about every Honda thumb throttle quad built! Replaces OEM Yamaha part # 5

This is a BRAND NEW carb slide throttle return spring by VITO'S PERFORMANCE These replaces the old one on your Keihin PWK carb Fits any size 33mm 34mm 35mm 36mm 38mm 39mm 41mm

This is a brand new Yamaha Raptor 660 or 700 thumb throttle lever assembly by VITOS PERFORMANCE Ready to install on any year Raptor 660 or 700 2001-2017, and it will also fit a Raptor 350, 250, 125, Wolverine, Big Bear, Breeze, or Kodiak etc Replaces OEM Yamaha part # 4KB-26250-00-00 and 4KB-26

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a BRAND NEW Vito's Performance thumb throttle carburetor cable Works on the stock factory OEM Mikuni carburetors that has had the TORS removed (Will not work with stock T.O.R.S.) These will fit any year Yamaha Banshee 1987-2006 This is for the THUMB throttle setup, and will NOT work for th

This is a brand new SILVER Yamaha Banshee thumb throttle lever assembly by VITO'S PERFORMANCE Ready to install on any year Banshee 1987-2006, and it will also fit a Blaster or Warrior. This is for one with the wire attached, but please check your plug style first Replaces OEM Yamaha part # 3GG-26

This is a brand new DUAL GASSER thumb throttle lever / twist throttle assembly by VITO'S PERFORMANCE This allows you to use both a thumb throttle AND a twist throttle on the same ATV Uses your factory throttle cable - no need to buy a special one Switch quickly between either style on the fly, and

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 28mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 28 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a BRAND NEW Vito's Performance TPS Throttle Positioning Sensor This throttle sensor assembly is over $102.99 new from Yamaha This replaces OEM Yamaha part number 8GL-85885-00-00 Fits: Yamaha Raptor 700 700r 2008-Current Yamaha Bolt 2014-2023 Yamaha FZ8 2011-2013 Yamah Raider

This is a BRAND NEW throttle cable lock collar by VITO'S PERFORMANCE These replaces the old one on your Keihin PWK carb Fits any size 33mm 34mm 35mm 36mm 38mm 39mm 41mm

This is a set of BRAND NEW Vito's Performance thumb throttle cable for a YFZ450 This is for the THUMB throttle setup, and will NOT work for the TWIST setup. Will fit any year carb model yfz 450 2004 - 2009 Replaces Yamaha OEM stock factory parts #: 5TG-26311-00-00

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a BRAND NEW 2009-current Yamaha YFZ450R or Raptor 700 thumb throttle cover only This is a genuine OEM factory Yamaha part fits: Yamaha Raptor 700 any year Yamaha Raptor 700r any year Yamaha YFZ 450R any year

This is a set of BRAND NEW Vito's Performance T.O.R.S. removal system Works on the stock Mikuni carburetors, are removes the bulky TORS system on top of the carb caps that is very prone to failure. These will fit any year Yamaha Banshee 1987-2006. With these aftermarket carb caps the carbs are ...

This is a BRAND NEW 2009-current Yamaha YFZ450R or Raptor 700 thumb throttle assembly This is a genuine OEM factory Yamaha part fits: Yamaha Raptor 700 any year Yamaha Raptor 700r any year Yamaha YFZ 450R any year

This is a BRAND NEW Yamaha Blaster aftermarket larger carb 35mm kit Kit includes: 1 x 35mm Carb 1 x Vito's Performance thumb throttle cable 1 x K&N Style filter and clamp 1 x Outerwear pre filter 1 x JET kit with 10 different main jets (150, 152, 155, 158, 160, 162, 165, 168, 170, 172) 1 x U

This is a BRAND NEW 2004 -2009 Yamaha YFZ450 thumb throttle assembly This is a genuine OEM factory Yamaha part Ready to install on a 2004 2005 2006 2007 2008 2009 YFZ450, 04 05 06 07 08 09 YFZ 450.

This is a brand new THROTTLE POSITION SENSOR from Vito's Performance This is a new part and will fit the following models: 2006-15 OUTLANDER 800 STD/XT 2006-15 OUTLANDER MAX 800 STD/XT 2007-15 OUTLANDER 500 STD/XT 2007-15 OUTLANDER MAX 500 STD/XT 2007-18 OUTLANDER 650 STD/XT 2007-18 ...

This is for a pair (2) grips These will fit any 7/8" handlebar One grip is slightly larger to accommodate a TWIST THROTTLE SETUP These will not work on a thumb throttle setup that both sides need to be the same diameter Nice rubber compound, soft, but they do not wear out quickly like the really s

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 28mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 28 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a BRAND NEW Yamaha Blaster 200 aftermarket larger carb 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the regular Keihin ...

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike ...

This is a brand new Yamaha Banshee thumb throttle lever assembly This is an OEM genuine Yamaha part, still in its packaging Ready to install on any year Yamaha Banshee 1987-2006, and it will also fit a Blaster 200 or Warrior 350. This is for one with the wire attached, but please your plug style

This is a brand new thumb throttle unit for a Can AM Outlander or Renegade Complete with all wiring for the 4x4 handlebar switch Fits the following models: 2008-2014 Can-Am Outlander 400 2018-2021 Can-Am Outlander 450 2015-2016 Can-Am Outlander L Max 450 2008-2015 Can-Am Outlander

This is a brand new Yamaha Raptor 660 or 700 thumb throttle lever assembly by VITOS PERFORMANCE Ready to install on any year Raptor 660 or 700 2001-2017, and it will also fit a Raptor 350, 250, 125, Wolverine, Big Bear, Breeze, or Kodiak etc Replaces OEM Yamaha part # 4KB-26250-00-00 and 4KB-26250-

This is a pair of BRAND NEW Yamaha Banshee 350 aftermarket larger twin carbs 35mm Comes complete with all vent tubes and hoses Don't be confused, these are not Keihin brand PWK 35 carbs, These are similar to the standard Keihin PWK carbs, but they have the Airstriker quad bowl vents, unlike the ...

This is a set of Pro Taper Synergy grips This is for a pair (2) grips These will fit any 7/8" handlebar Both grips are the same diameter, so they will not work for machines using a twist throttle Nice rubber compound, soft, but they do not wear out quickly like the really soft ones.

This is a BRAND NEW Vito's Performance thumb throttle cable Will work on ANY year Yamaha Raptor 350 YFM350R This is for the THUMB throttle setup, and will NOT work for the TWIST setup.

This is a set of BRAND NEW Vito's Performance thumb throttle carburetor cable Fits any of the stock carbs setups, from any year 660 Raptor This is for the THUMB throttle setup, and will NOT work for the TWIST setup.