This is a set of 2 front spindle nuts + washers for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the front hub onto the steering spindle OEM quality, fit, size, and finish, at a fraction of the dealer price Fits: Yamaha Banshee 350cc 1

This is a BRAND NEW Yamaha Raptor 660 or Yamaha YFZ450 swingarm pivot bolt, nut, and washer by Vito's Performance This is the bolt that goes through the frame and hold the swing-arm to the frame. It is very common for these to seize up inside the bushing tube Ready to install in any year YFZ 450 c

This is BRAND NEW OEM pair of carb intake boots for a Yamaha Raptor 660 Raptor These go right between the cylinder and the carb You get 2 boots, one left, and one right, with matching o-rings Its ready to install on ANY year Yamaha Raptor 660 660R 2001 20022003 2004 2005 Still new in the packaging

This is a BRAND NEW OEM REPLACEMENT wiring harness for a Yamaha Raptor 660 This is complete, with all the plugs for the headlights, key, brakes, etc Ready to install on any year 2002-2004 Yamaha Raptor 660r YFM660 Bolt-on, no modifications needed!

This is a pair of BRAND NEW Yamaha Raptor 660 ATV front shocks Distance is approx 15.5 inches eye to eye. They will fit any year Yamaha Raptor 660 / 660r 2001-2005 These are not the same as the other ones on eBay, this is our exclusive design We have tested these thoroughly, we made MANY ch

* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the ROUND STYLE BEAR

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +0" - STOCK LENGTH This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing ha

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +2" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making s

* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +10" This accepts the ROUND STYLE BEA

This is a pair of BRAND NEW Yamaha Raptor 660 ATV front shocks Distance is approx 15.5 inches eye to eye. They will fit any year Yamaha Raptor 660 / 660r 2001-2005 These are not the same as the other ones on eBay, this is our exclusive design We have tested these thoroughly, we made MANY ch

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +10" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +12" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making s

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making s

This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +8" This accepts the ROUND STYLE BEARING CARRIER This was professionally done, 100% TIG welded, 100% guaranteed to be free from all defects Tyson Racing has been making s

* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +12" This accepts the ROUND STYLE BEA

x This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +18" This accepts the ROUND STYLE BEA

* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +2" This accepts the ROUND STYLE BEAR

* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the ROUND STYLE BEAR

* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +8" This accepts the ROUND STYLE BEA

* This kit includes Vito's Performance round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the ROUND STYLE BEARING CARRIER This was professionall

x This kit includes Vito's Performance round style carrier, and billet polished brake caliper stay This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the ROUND STYLE BEARING CARRIER This was professionall

This is a BRAND NEW aftermarket Yamaha YFM660r Raptor 660 rear axle. This is a stock replacement axle, same size as the factory unit It is heat treated, and stronger than the stock unit its designed to replace It will fit any year Yamaha Raptor 660r This uses all the stock components (nuts, carrie

This is a set of BRAND NEW Vito's Performance thumb throttle carburetor cable Fits any of the stock carbs setups, from any year 660 Raptor This is for the THUMB throttle setup, and will NOT work for the TWIST setup.

CLUTCH COVER GASKET YAMAHA RAPTOR 660 2001-2005 REPLACES 5LP-15462-00-00 NEW CLUTCH COVER GASKET OE Quality Aftermarket Replacement Non-Asbestos, ISO 9001 Interface Material Exact item you will receive is pictured FITS: Yamaha Raptor 660 2001-2005

This is a NEW complete Yamaha Banshee 350 or Raptor 660 fuel petcock for the gas tank. This is made by VITO'S PERFORMANCE and has DUAL OUTPUTS This is a HIGH FLOW item - flows MUCH MUCH faster than the stock petcock A MUST HAVE for aftermarket carbs, especially if you are running methanol / alcohol

This is a BRAND NEW Yamaha Banshee upper + lower a-arm bushing replacement kit from Vito's Performance Includes 12 a-arm bushings This kit will replace all bushings in all 4 a-arms Includes enough to do FOUR (4) a-arms - both LEFT and RIGHT, upper and lower: 12 x Bushings Fits: 1987-2006 Banshee ...

This is a NEW Yamaha flywheel degree timing key Also known as a woodruff key or timing key This goes on the crankshaft, and hold the flywheel in place at the correct position fits these models: Yamaha Warrior 350 1987-2004 Yamaha Raptor 250 2008-1013 Yamaha Raptor 350 204-2013 Yamaha Raptor 660 200

This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, and looks very nice! Includes a one way vent hose with billet end cap that only allows air to enter the fuel tank to vent, and gas cannot leak out Please see our other listings for other available colors: ...

This Listing is a pair of front and rear brake pads for a 1990-2006 Yamaha Banshee. They will also fit 1990-2004 Yamaha Warrior or 2001-2005 660 Raptor. These are BRAND NEW High Quality, excellent stopping power, guaranteed, or your money back. This Listing is for THREE PAIRS of brake pads, one

This is a brand new Yamaha Banshee, Warrior, Raptor 660 ATV rear shock bearing kit by Vito's Performance contains all 7 pieces needed to replace your rear upper shock bushings / bearings. All necessary spacers, seals, clips, etc Equivalent to All Balls kit: 29-1020 also kits to following: Yamaha Y

This 2 rear axle castle hub nuts for any year Yamaha Banshee, Raptor 660, or YFZ450 Brand new from VITO'S PERFORMANCE This is the part that holds the the hubs onto the axle OEM quality, fit, size, and finish, at a fraction of the dealer price Also includes washers Fits: Yamaha Banshee 350cc 1987

This is TWO brand NEW Vito's Performance YAMAHA front shock mounting bolt kits This is the short bolt that hold the left + right shcoks to the suspension and frame This also includes the locking nuts this kit includes 4 x shock OEM style bolts 4 x locking OEM style nuts BRAND NEW, guaranteed to ...

This is a PAIR (2) brand new headlight bulbs by Vito's Performance These will fit any year Banshee, Warrior, Raptor 660 700, or YFZ450, as well as many others (listed below) These are 35W each, and produce a super bright WHITE light (not blue!) - nice upgrade over stock These are dual filamen

This is a BRAND NEW rear 38 tooth sprocket. It will fit on any year Banshee 1989-2006 (6 prong finger hub) Also fits: 2001 to 2005 Raptor 660 1989-2006 Warrior 350 1987-2006 Blaster 200 - When using a 38 tooth sprocket your chain may rub on the fingers of the sprocket hub so you may need to file

This is a set of brand new Vito's Performance 2001-2005 Yamaha Raptor 660r 660 fuel air mixture screws This is the EASIEST and quickest way to adjust your fuel/air mixture ratio No tools needed - adjust on the fly, right on the trails or track!

This is a Stainless Steel rear rotor by Vito's Performance These have built in cooling channel slots to help prolong the life of your pads and rotor, and prevent rotor warping Ready to install on any year Yamaha Banshee 350 1987-2006. will also fit: 1995-2005 Yamaha Wolverine 2001-2005 Yamaha ...

This is a BRAND NEW set of 4 wheel studs for a Yamaha ATV sport quad Serrated tapered ends guarantee a good tight snug fit This will fit the front OR the rear of any of the following models Fits YAMAHA: Banshee 350 1987-2006 Raptor 700/700R 2006-2022 YFZ450R 2009-2022 YFZ 450 ...

This is a BRAND NEW Vito's Performance aluminum rear desert style WIDE grab bar. fits Yamaha YFM660r Raptor 660 and YFZ 450 This is the WIDE DESERT style, makes for much easier lifting and moving of the ATV Made from high quality heast treated T6 aluminum Comes with strong corner flag mount for the

This is a brand new VITO's PERFORMANCE billet aluminum gas cap This was custom machined, and looks very nice! Includes a one way vent hose with billet end cap that only allows air to enter the fuel tank to vent, and gas cannot leak out It will fit the following: 1984-1985 Tri-Moto 225 1985-1995 ...

By VITO's Performance This is an aftermarket HIGH PERFORMANCE clutch fiber friction plate and steel plates and spring kit for your Yamaha Raptor 660r Perfect for modified bikes (or stock bikes) - the springs are 15% stronger than stock, so they can handle more HORSEPOWER without slipping These are

This is a set of 2 x 2004 -2009 Yamaha YFZ450 rear grab bar bumper fender mounting stay brackets Also fit Yamaha Raptor 660 2002-2005 (won't fit a 2001) 660r - replaces OEM 5LP-21613-10-00 This is for one pair - both left and right are included These are brand new! Ready to install on a 2001 2002

This is a brand new DUAL GASSER thumb throttle lever / twist throttle assembly by VITO'S PERFORMANCE This allows you to use both a thumb throttle AND a twist throttle on the same ATV Uses your factory throttle cable - no need to buy a special one Switch quickly between either style on the fly, and ...

This is a BRAND NEW Yamaha swingarm nut, and washer by Vito's Performance Replaces OEM Yamaha part #: 90185-16002-00 and 90201-160F6-00 FITS: ATVS: Yamaha Banshee 1987-2006 Yamaha Raptor 350 2004-2013 Yamaha Raptor 660 2001-2005 Yamaha Raptor 700 2006-2020 Yamaha Warrior 350 1987-2004 YFZ450 2004-

This is a pair of BRAND NEW Vito's Performance Yamaha Banshee 350 rear wheel hubs + lugnuts + washers This is for both sides (you get one matched pair) Will also fit a YFZ450r, YFZ450, Raptor 660 700 700r 350 250, or a Warrior axle and bolt pattern. These will also fit a Yamaha Blaster axle, so

This is a BRAND NEW rear 40 tooth sprocket. It will fit on any year Banshee 1989-2006 (6 prong finger hub) Also fits: 2001 to 2005 Raptor 660 1989-2006 Warrior 350 1987-2006 Blaster 200 - When using a 38 tooth sprocket your chain may rub on the fingers of the sprocket hub so you may need to file a

This is a BRAND NEW rear 42 tooth sprocket. It will fit on any year Banshee 1989-2006 (6 prong finger hub) Also fits: 2001 to 2005 Raptor 660 1989-2006 Warrior 350 1987-2006 Blaster 200 - When using a 38 tooth sprocket your chain may rub on the fingers of the sprocket hub so you may need to file a