carrier - Shop and Buy at Discount Prices

carrier

Vito
This is a brand new bolt kit from Vito's Performace  This bolt set includes 2 bolts, 2 washers, and 2 nuts (carrier not included, but shown in photos for reference) These are the bolts and nuts that go through the bearing carrier and hold the carrier to the swingarm
New Vito
This is a   Yamaha Banshee rear end assembly. The axle is +2" wider than stock, and is a brand new Vito's Performance Brand The carrier is also by Vito's and is brand new, with new bearings, and has a grease zerk fitting This setup includes the axle, bearing carrier, disc brake rot
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Carrier / 4"
* This kit includes Vito's Performance round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the ROUND STYLE BEARING CARRIER This
Rear Axle Bearing Carrier Hub Fits Suzuki Lt-R450 Quad Racer Ltr450 2006-2009
This is a BRAND NEW aftermarket billet aluminum twin row bearing carrier. This will fit a Suzuki LTR450 - any year 2006 2007 2008 2009 (or newer models) Replaces: Suzuki part # 64715-45G00 These billet aluminum bearing housings are machined from 6061 aluminum for superior housing strength.
Rear Axle Bearing Carrier For Honda TRX 400Ex 1999-2014 Atc 250R 42500-Hn1-A40
This is a BRAND NEW aftermarket billet aluminum twin row bearing carrier. This will fit a 1999 or newer HONDA 400EX or 400x  TRX400 TRX 400 or 250r any year, 1986-2014 This is the roundhouse OEM Honda style carrier replaces: Honda OEM #42500-HN1-A40 These billet aluminum bearing hous
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 6"
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the R
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 2"
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +2" This accepts the R
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 8"
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a  BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +8" This accepts
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 10
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +10" This accepts the
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 4"
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +4" This accepts the R
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier +18
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +18" This accepts the
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Carrier +6"
* This kit includes Vito's Performance round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +6" This accepts the ROUND STYLE BEARING CARRIER This
Tyson Racing Raptor 660 2001-2005 Swingarm 660R Extended And Bearings Carrier / 12
* This kit includes Vito's Performance front bearings and pivot sleeves, round style carrier, and billet polished brake caliper stay   This is a BRAND NEW RAPTOR 660 custom CHROMOLY swingarm done by TYSON RACING This model is longer than stock by an extended plus +12" This accepts the
New Wheel Bearings / Seals Rear Axle Carrier Yamaha Banshee Swingarm 1987-2006
This is a BRAND NEW Vito's Performance aftermarket swingarm bearing carrier rebuild kit for a Yamaha Banshee, 660 Raptor, or Blaster These are the rear wheel bearings that the axle slides through Kit includes 2 x rear pre-greased sealed bearings, and 2 x dust seals as well Replaces OEM # 9330
New Rear Bearing Axle Carrier Housing Yamaha Banshee Swingarm 87-06 / Bearings
This is a BRAND NEW aftermarket swingarm bearing carrier for a Yamaha Banshee. Fits 1987-2006 Banshees, and is BRAND NEW, powdercoated silver.  These are over $195 new from Yamaha! FREE SHIPPING Upgraded over stock, includes ZERK grease fitting, so keep everything fresh; OEM ones do no
New Yamaha Banshee Aluminum Round Style Bearing Carrier 35MM Brake Caliper Stay
This is a BRAND NEW billet aluminum twin row bearing carrier. This is the roundhouse style carrier for aftermarket swingarms. It is the 35mm size, and it will work for stock or aftermarket axles (but not 40mm drag axles). This is ready to install, includes all the bearings and seals needed
Vito
This is a BRAND NEW Vito's Performance swingarm bearing carrier for a Yamaha Warrior. Fits 1989-2004 Yamaha Warrior 350, and is BRAND NEW, powdercoated silver.  These are over $195 new from Yamaha! FREE SHIPPING Upgraded over stock, includes ZERK grease fitting, so keep everything fres
NEW BRAKE STAY Banshee round rear carrier bearing spacers caliper mount POLISHED
This is a BRAND NEW aluminum brake stay (rear caliper mounting plate) This includes the aluminum caliper spacers and brake plate retainer spring snap ring. Will fit on 35mm or 40mm carriers 69.9MM ID This has been polished as well, not dull or rough looking like many others on the market.
New Yamaha Banshee Aftermarket Aluminum Twin Row Round Carrier And Bearings 35Mm
This is a BRAND NEW aftermarket aluminum twin row bearing carrier. This is the roundhouse Honda style carrier for aftermarket swingarms. It will work for stock 35mm or aftermarket axles, including Yamaha, Lonestar, Durablue, G Force, or Roll Design. This is ready to install, includes all b
2002-2008 Grizzly Rhino 660 Wet Clutch Kit Housing Carrier Springs
This is a Yamaha Rhino 660 / Grizzly 660 clutch setup! fits Rhino 660 2004-2007, or a Grizzly 660 2002-2008 Includes everything you see!   Includes the following: Clutch housing - Replaces OEM # 5KM-16611-10-00 Clutch carrier - Replaces OEM # 5KM-16620-00-00   Yamaha ATV
2002-2008 Grizzly Rhino 660 Clutch Kit Housing Carrier Primary Sheave Wet Clutch
This is a Yamaha Rhino 660 / Grizzly 660 clutch setup! fits Rhino 660 2004-2007, or a Grizzly 660 2002-2008 Includes everything you see!   Includes the following: Clutch housing - Replaces OEM # 5KM-16611-10-00 Clutch carrier - Replaces OEM # 5KM-16620-00-00 Primary clutch, fix
New Rear Axle Carrier Spacer Tube
This is a BRAND NEW swingarm bearing carrier SPACER TUBE for a Yamaha Banshee or Yamaha Raptor 660 This is the piece that the axle slides through inside the rear bearing carrier replaces oem Yamaha part # 90560-35263-00
New Rear Bearing Axle Carrier Housing Only Yamaha Banshee Swingarm 1987-2006
This is a BRAND NEW aftermarket swingarm bearing carrier for a Yamaha Banshee. Fits 1987-2006 Banshees, and is BRAND NEW, powdercoated silver. This is just the actual housing itself, and does NOT include the bearings, axle tube, or dust seals (but we do sell them in our other listings). Up
Vito
This is a BRAND NEW aftermarket swingarm bearing carrier rebuild kit for a Yamaha Warrior YFM350 1988-2004 These are the bearings that the axle slides through also known as rear wheel bearings Kit includes 2 rear pre-greased sealed bearings, and 2 dust seals as well
2002-2008 Grizzly Rhino 660 Clutch Kit Housing Carrier Primary Secondary Sheave
This is a Yamaha Rhino 660 / Grizzly 660 clutch setup! fits Rhino 660 2004-2007, or a Grizzly 660 2002-2008 The most complete kit on the market! Includes everything you see!   Includes the following: Clutch housing - Replaces OEM # 5KM-16611-10-00 Clutch carrier - Replaces OEM #
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's +2" extended axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's +2" extended axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Raptor 660 Round Bearing Carrier And Brake Caliper Stay For Tyson Swingarm
This is a BRAND NEW billet aluminum twin row bearing carrier for a Yamaha Raptor 660 AFTERMARKET swingarm This is the roundhouse style carrier for aftermarket swingarms. It is the 35mm size, and it will work for stock or aftermarket axles (but not 40mm drag axles). This is ready to install,
New Rear Bearing Axle Carrier Housing Only Yamaha Warrior Swingarm 1990-2004
This is a BRAND NEW aftermarket swingarm bearing carrier for a Yamaha Warrior 350. Fits 1990-2004 YFM350, and is BRAND NEW, powdercoated silver. This is just the actual housing itself, and does NOT include the bearings, axle tube, or dust seals (but we do sell them in our other listings).
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's +2" extended axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Yamaha Warrior 350 Spacer Tube Rear Axle Carrier YFM350 Swingarm 1987-2006
This is a BRAND NEW swingarm bearing carrier SPACER TUBE for a Yamaha Warrior 350 This is the piece that the axle slides through inside the rear bearing carrier replaces oem Yamaha part # 2XK-25317-00-00 or 1UY-25317-00-00
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's stock length axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's stock length axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New 40MM Drag Axle Banshee Aftermarket Aluminum Round Bearing Carrier Brake Stay
This is a BRAND NEW 40mm DRAG AXLE billet aluminum twin row bearing carrier. This is the roundhouse style carrier for aftermarket swingarms. It is the 40mm size, and it will work NOT for stock but only 40mm drag axles. This is ready to install, includes all the bearings and seals needed, and
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's +2" extended axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's +2" extended axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's +2" extended axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's stock length axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's +2" extended axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's stock length axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
Factory Rear Axle Carrier Spacer Tube Swingarm 87-06
This is a BRAND NEW Yamaha factory OEM swingarm bearing carrier SPACER TUBE for a Yamaha Banshee or Raptor. This is the piece that the axle slides through inside the rear bearing carrier   Fits: 1987-2006 Banshees, and is BRAND NEW 2001-2005 Raptor 660 1985 1986 TRI-Z tri Z YTZ25
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's stock length axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's stock length axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
New Vito
This is a complete BRAND NEW Yamaha Banshee rear end assembly from Vito's Performance Looks awesome, Will fit any year Banshee 1987-2006 Includes the following, all NEW parts:   Vito's stock length axle - heat treated for strength Vito's 2 x axle nuts + washers - to hold carrier onto
Vito
This is a BRAND NEW aftermarket Yamaha Banshee rear axle. This is +2" wider than stock, giving you better stability, especially at high speeds It is heat treated, and stronger than the stock unit its designed to replace It will fit any year Yamaha Banshee 1987-2006, and will fit a stock or ...
New Vito
This is a BRAND NEW aftermarket Vito's Performance extended wider +2" Yamaha Banshee rear axle kit This includes 2 brand new Vito's hub nuts and washers, as well as 2 Vito's Performance axle nuts (2)   This is +2" wider than a stock unit, and it is a bolt on replacement for your old ...
Vito
This is a BRAND NEW aftermarket Vito's Performance Yamaha Blaster 200 rear axle. This is the same size as a stock unit, and it is a bolt on replacement for your old rusty or bent axle It is heat treated to be stronger than the stock unit its designed to replace It will fit any year Yamaha ...
New Vito
NOS - NEW OLD  STOCK brand new never mounted, but may have scratches or dusty from being on shelf This has been discounted for faster sale   This is a BRAND NEW aftermarket Yamaha Banshee rear axle. This is the same size as a stock unit, and its a bolt on replacement for your ...
New Vito
This is a BRAND NEW aftermarket Yamaha Banshee rear axle kit This includes 2 brand new hub nuts and washers, as well as 2 new axle nuts   This is the same size as a stock unit, and it is a bolt on replacement for your old rusty or bent axle It is heat treated to be stronger than the ...
My Account